Dr. Dobb's is part of the Informa Tech Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.


Channels ▼
RSS

Embedded Systems

Real-Time Enough


Robert is an independent consultant specializing in real-time and embedded systems. He can be contacted at [email protected] or http://www.parse.com/.


Caller ID

Caller ID, which is a feature that tells you who is calling on the telephone, occurs as a Frequency Shift Keying (FSK) signal between the first and second ring. It operates at 1200 baud, using the Bell-202 Standard, which is based on 1200 Hz (a "mark," representing a 1) and 2200 Hz (a "space," representing a 0) tones. It's a serial transmission, with a start bit, 8 bits of data, no parity, and a stop bit. At the data level, it consists of packets of information with checksums.

In this article, I discuss a real-time caller-ID implementation that is part of a voice-activated call monitoring system I built. In particular, I discuss how the caller-ID part of the solution has evolved from a hardware FSK modem in the early 1990s to the software FSK modem in use today. While my particular implementation is based on FreeBSD 5.3, there is nothing operating-system specific here.

My hardware consists of an adapter for a phone line (Figure 1) that converts the telephone signal into something that I can feed into a sound card's input. Because I have two lines, I have two such circuits in my system. I've conveniently used the sound card's left channel for one line, and the right channel for the other.

[Click image to view at full size]

Figure 1: Telephone line adapter.


Related Reading


More Insights






Currently we allow the following HTML tags in comments:

Single tags

These tags can be used alone and don't need an ending tag.

<br> Defines a single line break

<hr> Defines a horizontal line

Matching tags

These require an ending tag - e.g. <i>italic text</i>

<a> Defines an anchor

<b> Defines bold text

<big> Defines big text

<blockquote> Defines a long quotation

<caption> Defines a table caption

<cite> Defines a citation

<code> Defines computer code text

<em> Defines emphasized text

<fieldset> Defines a border around elements in a form

<h1> This is heading 1

<h2> This is heading 2

<h3> This is heading 3

<h4> This is heading 4

<h5> This is heading 5

<h6> This is heading 6

<i> Defines italic text

<p> Defines a paragraph

<pre> Defines preformatted text

<q> Defines a short quotation

<samp> Defines sample computer code text

<small> Defines small text

<span> Defines a section in a document

<s> Defines strikethrough text

<strike> Defines strikethrough text

<strong> Defines strong text

<sub> Defines subscripted text

<sup> Defines superscripted text

<u> Defines underlined text

Dr. Dobb's encourages readers to engage in spirited, healthy debate, including taking us to task. However, Dr. Dobb's moderates all comments posted to our site, and reserves the right to modify or remove any content that it determines to be derogatory, offensive, inflammatory, vulgar, irrelevant/off-topic, racist or obvious marketing or spam. Dr. Dobb's further reserves the right to disable the profile of any commenter participating in said activities.

 
Disqus Tips To upload an avatar photo, first complete your Disqus profile. | View the list of supported HTML tags you can use to style comments. | Please read our commenting policy.