Dr. Dobb's is part of the Informa Tech Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Channels ▼

Al Williams

Dr. Dobb's Bloggers

The $25 FPGA

September 16, 2013

I've long been an advocate for getting people started using FPGAs. I've mentioned here before that FPGAs aren't for everything (no tool is for everything), but I do often see people struggling to build something with a CPU that would be pretty easy to do with an FPGA if they only knew how.

When FPGAs were first on the market, it was a pretty major investment in hardware and software to get going with them. Things have certainly changed. Most vendors have adequate free tools for their silicon, so the cost of software (at least, considering that you surely already have a computer running some sort of operating system) is nil. Development boards keep getting cheaper and the interface between the PC and the FPGA doesn't have to be very expensive either.

In fact, some development boards have dedicated PC ports (usually USB). The board can use the port to configure the FPGA on the fly, burn the onboard configuration flash (which makes the design semi-permanent; that is, it "sticks" until you reflash it), and possibly even do some debugging.

However, Lattice seems to have taken this idea to the extreme. The iCEstick evaluation kit looks like a naked USB memory stick. Onboard is a fairly small FPGA, a USB interface chip, an IrDA transceiver, an oscillator, and a 32-megabit flash memory. There are also 5 LEDs, 16 digital I/O pins, and a PMOD port that can connect to many off-the-shelf modules from Digilent and a few other vendors.

The cost? $25. The FPGA isn't going to host the next supercomputer. It has 1,280 logic cells, a PLL for clock generation, and a modest amount of RAM blocks (64 kbits). On the other hand, the chip draws very little current, which is attractive in many applications. While 1280 logic cells doesn't sound like a lot compared to some of the big chips, it is a lot more than, say, a common CPLD, and you can do quite a bit with those.

The iCEcube2 software allows you to work with the device on Windows or Linux. These would be great for classroom use or for self-study. Most people drop more money on a week's worth of premium coffee (not me; I gave it up years ago). I plan on getting a few of these because I frequently loan FPGA boards out and at that price I won't be so worried about getting them back. Look for my thoughts on actually using the iCEstick later this year.

What's your favorite FPGA development board? I'm partial to the Digilent Spartan 3 board but I agree it is getting a bit dated. Leave a comment about what boards you are using and why.

Related Reading

More Insights

Currently we allow the following HTML tags in comments:

Single tags

These tags can be used alone and don't need an ending tag.

<br> Defines a single line break

<hr> Defines a horizontal line

Matching tags

These require an ending tag - e.g. <i>italic text</i>

<a> Defines an anchor

<b> Defines bold text

<big> Defines big text

<blockquote> Defines a long quotation

<caption> Defines a table caption

<cite> Defines a citation

<code> Defines computer code text

<em> Defines emphasized text

<fieldset> Defines a border around elements in a form

<h1> This is heading 1

<h2> This is heading 2

<h3> This is heading 3

<h4> This is heading 4

<h5> This is heading 5

<h6> This is heading 6

<i> Defines italic text

<p> Defines a paragraph

<pre> Defines preformatted text

<q> Defines a short quotation

<samp> Defines sample computer code text

<small> Defines small text

<span> Defines a section in a document

<s> Defines strikethrough text

<strike> Defines strikethrough text

<strong> Defines strong text

<sub> Defines subscripted text

<sup> Defines superscripted text

<u> Defines underlined text

Dr. Dobb's encourages readers to engage in spirited, healthy debate, including taking us to task. However, Dr. Dobb's moderates all comments posted to our site, and reserves the right to modify or remove any content that it determines to be derogatory, offensive, inflammatory, vulgar, irrelevant/off-topic, racist or obvious marketing or spam. Dr. Dobb's further reserves the right to disable the profile of any commenter participating in said activities.

Disqus Tips To upload an avatar photo, first complete your Disqus profile. | View the list of supported HTML tags you can use to style comments. | Please read our commenting policy.