Channels ▼
RSS

Design

Designing a VoIP Media Phone Framework


Call-Level Design

Within the framework core each DSP component such as Acoustic Echo Cancellation, Tone Generator, Tone Detector, etc., should be made into a modular block. These blocks can then be joined together to form a data processing pipeline (see Figure 2). An inbound endpoint connection would consist of the inbound pipeline and an outbound pipeline.

[Click image to view at full size]
Figure 2: Endpoint Design.

To complete a call connection within the VPF, two endpoints need to be connected together. Figure 3 shows the setup for an endpoint IP call.

[Click image to view at full size]
Figure 3: Sample Call Connection.

This provides a very powerful and flexible method of configuration call connections. N-way calls can be set up by connecting the endpoints together, and forking can be configured just by disabling the inbound pipeline of an endpoint.

A number of blocks can be strung together within a pipeline to perform the necessary soft DSP for the incoming data. Below are example configurations of the pipeline for IP and PCM inbound and outbound. Each block can be turned on or off as needed. The following pipeline configurations provide the flexibility to support many scenarios.

[Click image to view at full size]
Figure 4: PCM Inbound Pipeline.

[Click image to view at full size]
Figure 5: PCM Outbound Pipeline.

[Click image to view at full size]
Figure 6: IP Inbound Pipeline.

[Click image to view at full size]
Figure 7: IP Outbound Pipeline.

The Sample Rate Converter component is one example of how a flexible configuration can reduce CPU usage of the pipeline. Narrowband data requires less processing than wideband data within each component; therefore, to minimize CPU usage, as many blocks as possible should be run in narrowband mode. The following examples show how placement of the SRC block can be used to reduce the CPU usage of the system.


Related Reading


More Insights






Currently we allow the following HTML tags in comments:

Single tags

These tags can be used alone and don't need an ending tag.

<br> Defines a single line break

<hr> Defines a horizontal line

Matching tags

These require an ending tag - e.g. <i>italic text</i>

<a> Defines an anchor

<b> Defines bold text

<big> Defines big text

<blockquote> Defines a long quotation

<caption> Defines a table caption

<cite> Defines a citation

<code> Defines computer code text

<em> Defines emphasized text

<fieldset> Defines a border around elements in a form

<h1> This is heading 1

<h2> This is heading 2

<h3> This is heading 3

<h4> This is heading 4

<h5> This is heading 5

<h6> This is heading 6

<i> Defines italic text

<p> Defines a paragraph

<pre> Defines preformatted text

<q> Defines a short quotation

<samp> Defines sample computer code text

<small> Defines small text

<span> Defines a section in a document

<s> Defines strikethrough text

<strike> Defines strikethrough text

<strong> Defines strong text

<sub> Defines subscripted text

<sup> Defines superscripted text

<u> Defines underlined text

Dr. Dobb's encourages readers to engage in spirited, healthy debate, including taking us to task. However, Dr. Dobb's moderates all comments posted to our site, and reserves the right to modify or remove any content that it determines to be derogatory, offensive, inflammatory, vulgar, irrelevant/off-topic, racist or obvious marketing or spam. Dr. Dobb's further reserves the right to disable the profile of any commenter participating in said activities.

 
Disqus Tips To upload an avatar photo, first complete your Disqus profile. | View the list of supported HTML tags you can use to style comments. | Please read our commenting policy.
 

Video